Yale SmartHome Alarm series Dokumentacja Pobierz pdf (Strona 24)

Troubleshooting

Siren

Siren does not respond to arming or disarming

•Sirenbatteriesarecompletelyexhausted.

Check siren batteries by removing siren cover, if

there is no tamper alarm when removed, replace

batteries with new alkaline equivalents.

•Sirennotlearnt-in.Ifsirenproducesatamper

alarm when the cover is removed and siren is OK,

learn-in the siren.

•Sirenoutofrange.

Siren produces a 3 second alarm when

disarmed

•Therehasbeenapreviousalarmandtheremight

be an intruder still in the premises.

Siren produces a series of pips when armed or

disarmed

•Thesirenhaslowbatteries.Checkthatthe

siren produces a series of pips when arming

and disarming, indicating low batteries. Change

batteries with new alkaline replacements.

•Thesirentamperswitchhasbeendisturbed.

Check that the siren produces a series of pips only

when arming, indicating a tamper fault. Check that

the siren cover is ﬁrmly secured and the tamper

switch plunger is in contact with the wall. If not use

suitable packing material to ﬁll gap.

Siren produces an interrupted tone when

sounding an alarm

•Thesirenhaslowbatteries.Changebatterieswith

new alkaline replacements.

_____________________________________________

PIR

PIR does not respond to movement

•PreviousmovementhastriggeredthePIRsleep

timer and is preventing subsequent movement

detection. Arm system and vacate protected room

for at least 1.5 minutes before testing.

PIR is slow to respond

•Thisisnormal,thePIRhassophisticatedfalse

alarm ﬁltering that will ﬁlter out random ﬂuctuations

and responds to genuine movement across ﬁeld of

view, it is less sensitive walking directly towards it.

PIR gives false alarms

•Checkpetshavenoaccesstoprotectedarea.

•CheckthatPIRisnotpointedatsourcesofheator

moving objects, e.g. ﬂuttering curtains.

•CheckthatPIRisnotmountedaboveconvector

heaters or pointing directly at windows.

PIR LED ﬂashes

•Batteriesareloworthetamperswitchisdisturbed.

Check that the tamper switch spring is making

contact with base. If the tamper switch is OK,

change batteries with new alkaline replacements.

PIR does not respond to movement

•Batteriesarecompletelyexhausted.Change

batteries with new alkaline replacements, LED will

ﬂash for 30 seconds while components initialise.

_____________________________________________

Door contact

Door contact LED lights up

•Batteriesareloworthetamperswitchdisturbed.

Check that the tamper switch spring is making

contact with the mounting surface. If the tamper

switch is OK, change batteries with new CR2032

coin cell replacements.

Door contact does not respond to door

opening when jumper is in test position

•Batteriesarecompletelyexhausted.Change

batteries with new CR2032 coin cell replacements.

•Themagnetistoofarawayfromthedoorcontact.

Check that the gap between door contact and

magnet is not greater than 8mm.

_____________________________________________

Control unit

User PIN code is not accepted by the control

unit.

•Donotpauseformorethan5secondsinbetween

pressing the keys on the keypad.

•Incorrectcodeentered.Re-enterthecorrectPIN

code.

•Resetsettings-see‘ResetProcedure’and

reprogram the system.

_____________________________________________

Voice - Dialler not responding to alarm

•Checkthetelephonelineisconnectedand

that the correct telephone numbers have been

programmed.

For online assistance, please visit: www.Yale.co.uk

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Yale SmartHome Alarm series Dokumentacja Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Yale SmartHome Alarm series