Yale SmartHome Alarm series Dokumentacja Pobierz pdf (Strona 4)

Unpack all the parts

Control unit

Unpack the kit content on a table. Remove the

mounting plate (if ﬁtted) from the control unit by

sliding plate downwards. A power adaptor is

supplied that plugs into the main wall socket and

control unit. Do no plug in at this stage, this will be

done at Section 3.

•Inadditiontotheadapter,thereisarechargeable

battery inside the control unit that serves as a

backup in case of a power failure. A fully charged

battery can provide backup power for a period

of at least 10 hours. It takes approximately 36

hours to fully charge the battery. The control unit is

equipped with a backlit LCD display and keypad

for easy operation in the dark. To conserve backup

battery duration the backlights will be switched off

during mains power failure.

•Removetherubberbatteryswitchcoverand

locate the battery switch to the right in the

direction of the arrow to switch the internal battery

“on” and replace the rubber cover.

Siren

WARNING

The siren is very loud, be prepared! Take care not to

activate the siren tamper switch unnecessarily.

1 Remove the cover by unscrewing the single screw

located on the lid.

2 Power switch to ON position.

PIR movement detectors

1 Pull out the plastic pull tab on the back of the PIR.

This will activate the batteries.

Siren

Text Display

Down

Backspace/Return

Microphone

Power LED

Fault LED

Menu Home Arm

Numeric

keys

Arm Disarm

Plate

ale

Status

LED

Learn/Test

Button

Cover

screw

1 2 3 4 5 6 7 8 9 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Yale SmartHome Alarm series Dokumentacja Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Yale SmartHome Alarm series